ESXi installation

VMware offers a free 60-day evaluation of ESXi. To download your version of ESXi, go to this link. You will need to register to download your version of ESXi.

After you download the ESXi ISO image, burn that image to a CD. Next, you need to set up the BIOS to boot from the CD-ROM device. Here are the steps:

First, when computer boots, enter the BIOS setup. This can be done in a number of different ways, depending on the motherboard type of your computer. Entering the BIOS is usually done by pressing the F2, F10 or ESC key while the computer is booting. Check the documentation of your motherboard vendor for more information.

In the BIOS utility, go to the Boot tab:

bios utility

Make sure that your CD/ROM is the first listed device. If not, follow the instructions on the right side of the screen to move the CD/ROM entry to the top.

bios boot order

The next step is to save the changes you’ve just made. Go to the Exit tab and select Exit saving changes:

bios save changes

Restart you computer. The ESXi installation should now begin.

After all the files necessary for the installation have been copied, you should get the following screen:

esxi installation welcome screen

Press Enter to Continue.

Next, you will need to accept the license agreement:

esxi installation eula

Press F11 to accept and continue.

Next, you need to select the drive on which to install ESXi:

esxi installation select drive

Select you drive on which you want to install ESXi and press Enter to continue.

Next, you need to select the keyboard layout for the host:

esxi installation keyboard layout

Select your keyboard layout and press Enter.

Now you need to set the root password for the host:

esxi installation set root password

Choose the root password and press Enter.

To begin the installation, press F11:

esxi begin installation

SEE ALLAdd a note
YOU
Add your Comment
 

Who’s Online

Profile picture of Kelvin Njoroge

Subscribe to our Newsletter

Like us on Facebook

Geek University 2019